microsquirt v3 plug and play quick overview

while on vacation in florida

visited some friends and ripped around town in a viper haha
just a short clip

driving around big don's turbo 6.0 junkyard special

had big don's turbo junkyard turbo and motor trans am out today

Z06 Dave's corvette for sale

Z06 dave would like to sell his supercharged corvette, check out the ride along.

everything buttoned up today, twin pumps in the stock tank, meth kit, IAT sensor, boost controller you name it, got the car out and tuned up so far on 10psi, feels retarded, enjoy this short video!

Map sensor adaptor harness

Built this adaptor harness for donavans car, it has a new style map sensor plug and we were updating it to the older style ebay 3 bar connector, it plugs in to the stock harness and changes the map sensor over to a older style map plug, nice and neat. easier than working on the harness in the back of the car.

got the firebird running on the ebay 3 bar map, and the HPtuners 3 bar Custom OS for now, doing good, they are going to install the methanol kit and the fuel pump next and then we will see what kinda numbers we can get out of this pig

Excited to see this today, over 2000 subscirbers and almost 4 million views for sloppy mechanics youtube channel!

Don has started turbo'ing his ws6

All mocked up and hot and cold side done , only has a few more things to finish in order to fire it up

EMSpro Plug and play harness and ecu ready to test tomorrow

finished this up at around 3am tonight, and spark and everything else is working, plugged it into some dummy coils and it fires them etc. going to plug er in complete to the fairmont tomorrow and try and test fire it.

finished up Chads 5.3 wiring and fired it.

my friend chad swapped in this 5.3 and got everything ready to start it today so i headed up and loaded a tune and it fired right up, a few things to clean up and finish then its going on the dyno to see how this does with the stock cam and twin 57s, you can see where I installed the IAT in the intake with RTV and a hammer, and then blocked off the IACV with a bolt and more RTV.

got chads 5.3 twin turbo third gen running today

AJ's Nice fairmont cruise

taking my friend AJ out for a nice cruise around town

Denmah Universal turbo package from VS racing

its official! there is now a denmah/sloppy mechanics universal turbo package, a pile of my most used parts with some options all together for a better price.

Contact Sales@vsracing.net for more information!

http://www.theturboforums.com/threads/365715-Denmah-super-turbo-special-Sloppy-Style


1 GT 45 Turbo
1 GT 45 discharge and clamp
1 3" intercooler 31*12*3
1 60mm WG
1 50mm BOV
1 2.5" ic piping kit with couplers black or silver
oil drain and feed braided setup
t4 divided flange

all for 868 shipped in the lower 48 states. Normally we would sell this for 1029

upgrade to 4" intercooler add 50.00
upgrade to 3" piping kit add 50.00
upgrade walbro 255lph add 99
upgrade injectors 80lb add 400.00 60lb 350

VS Racing 972-987-5607 NEW NUMBER Closed during Lunch hours 11am -12pm CST TIme.
M-F 9am - 4pm CST TIME
email sales@vsracing.net /domestic advisor

Fixed my turbo drain

Had some problems with it seeping and I had a mess of pipe fittings converting it to -8 and it leaked like a bitch, finally put a -10 two bolt and bought a -10 90 to push lock that was super expensive but it doesn't leak anymore haha

Picked up a 5.3 in my Kia today

Picked It up in my harbor freight trailer haha

two popular tune files available for download

I uploaded 2 base tunes for people to download.

http://sloppymechanics.com/tunes/MS1extra_turbo53.zip
this is the turbo 5.3 notchback that runs 9s.
5.3, ls9 cam, ls6 intake, S475 turbo, 80lb injectors. water/meth injection. 110-112 racegas.

http://sloppymechanics.com/tunes/Fairmont_Micro2_E85.zip
Latest Fairmont Microsquirt 2 V3 tune running fuel and spark reading off the stock crank trigger.
2003 block, 08 pistons and rods, 243/799 heads, ls1 intake, 80lb siemens deka injectors, 80mm turbo. E85 fuel, methanol injection.


note, these are the whole project files zipped, so you just unzip them and drop the folder it creates into your
Documents/tunerstudioprojects/ folder and then when you open tuner studio, you can hit "open project" and select one of these and it will load the dash, tune and other project settings automatically.

cecil county results

well we got to cecil county at 8am and they were drying the track, and around 1pm they were still drying the track and were offering refunds, still foggy and wet, we decided to take the refund and head home.

Swapping tq converters in the sunbird

Before the racing tomorrow so long as the weather holds out. Other converter was giving is issues so we threw in a spare we had lol

doing some product testing R&D

Recently i was asked if i would take what i am doing with the MS2 and see if i could make LSX engines run on this EMSpro built by EFI Source, a company only a few miles away from me. Having more on board features, and what looks to be an even easier setup with wiring. I will be wiring it up and testing it out, probably also making some video of it of course.

testing the antilag/launch control features
2800rpm
-10deg
2950 cutoff
makes 8psi easy and i left off and didnt use full throttle.

not bad for a 5.3 with a 80mm

testing the sunbird trans brake

hopefully racing saturday if the weather is nice

turbo henry J i consulted on over the intarwebs lol

so over the last few months, ive been helping a guy in las vegas build and wire and fire a turbo LSX swapped  Henry J and he sent me a short clip on his phone of driving it down the road, ill wait to see if he can post up a longer one before i upload that one, because its only about 14 seconds, i would love for him to do a walk around and explain some things and upload it and then i can link it to you guys.

but check it out!

Update! he has a youtube video of it