firing the boat anchor on the floor with microsquirt

marks notch 8.41@163 on 16psi at atco saturday

dougs nova on the rollers

get it working then clean it up!?

this is the wiring i threw together quick for my neighbors corvette, 79 vette with a silverado 4.8 and 60e swapped into it, i like to use wire nuts to make sure everything is working before you permanently wire it, then after it was all working he cleaned it up nice and neat on the right side, looks stock!

9-25-14 mark racing the notch turbo wheelies

marks notch 8.40 today!

tuned tims 5.3 crapi today

threw my friends capri on the dyno today with his fresh 5.3 and LJMS cam, car made 690wheel hp on pumpgas and methanol pretty awesome!

240 update pics from engine and trans mounts

240 update video

getting some more done on the 240 so made a quick video!

put an iron 6.0 in the ventura

threw in the spare iron 6.0 into the ventura with iron heads!

steves twin turbo 5.3 crown vic

havent posted much about this car, but i am building it with a friend, its a crown vic, we dropped in a 5.3 and 80e, stock converter, 80lb injectors and i quick built a turbo kit for twin 70mm turbos.

nearly done with the ventura

coolant system is closed up, and circulating, fan is working numerous other things setup and working great right now, car is getting paperwork and registration this week so we should have it out and making some noise, very curious to see how much power it makes and how it does.

66 c10 chevy pickup with a 03 5.3 and 4l60e in it

fired this swap today, Joe and Ryan swapped the truck and wired it, and i just stopped by to plug in the ecu and get it fired up and running! awesome to see it key to life, the injectors were actually frozen and we had to hit them with a wrench and power them off the battery with alligator clips to kick them open haha

my friend Ryan is helping his friend swap a older truck with a 5.3 and 4l60e combo!

i am excited to see this done!

dyno'd my truck today for fun

675whp @ 17 psi.

8.8 swapped out to anther 8.8 and some other ramblings

complete as of today

79 malibu, 02 lq4, gt45 turbo, 4l80e, ford 8.8, stock comptuer/psi harness tuned on Hptuners speed density 3bar

johns turbo 5.3 nova running!

all that really needs to be done now is some tricky alum welding for the intercooler piping, and our friend is going to cover that! then its off for some boosted tuning!

sold two motors today

2003 5.3l and a 2004 6.0l going to a good home in new jersey

Johns nova nearing completion

nearly done with Johns nova, aluminum 5.3 runs, trans fitting broke, so he has to get one of those, we did the oil feed and drain for the turbo, re-did the downpipe, mounted the intercooler and test fit the radiator, its going to goto ryan ackerman next once its running and cooling system works, to get some alum piping welded up for the intercooler, and then we can get to flooring it.