Showing posts with label notch. Show all posts
Showing posts with label notch. Show all posts
Saturday, November 15, 2014
Saturday, October 25, 2014
Thursday, October 23, 2014
Sunday, October 19, 2014
Sunday, October 12, 2014
Threw two of donovans cars on the dyno today for a fall touch up
88 notch
08 ly6 junkyard 6.0 turbo cam, cast 80mm Borg warner springs, stock head bolts and gaskets etc motor never been apart, microsquirt, 80lb injectors th400, ptc billet converter, 3.55 gears, 28 inch slicks
pumpgas meth
16psi 15deg timing
02 trans am
06 6.0 iron motor, old nitrous cam, stock heads, billet 80mm borg warner, 4l80e, stock pcm, 80lb injectors, 16psi 13deg timing ford 9 inch rear, unlocked yank converter. 8 year old valvesprings
08 ly6 junkyard 6.0 turbo cam, cast 80mm Borg warner springs, stock head bolts and gaskets etc motor never been apart, microsquirt, 80lb injectors th400, ptc billet converter, 3.55 gears, 28 inch slicks
pumpgas meth
16psi 15deg timing
02 trans am
06 6.0 iron motor, old nitrous cam, stock heads, billet 80mm borg warner, 4l80e, stock pcm, 80lb injectors, 16psi 13deg timing ford 9 inch rear, unlocked yank converter. 8 year old valvesprings
Saturday, October 11, 2014
Wednesday, October 1, 2014
Thursday, September 25, 2014
Monday, September 15, 2014
Friday, August 29, 2014
Jace Nester's Ultra street car on the dyno at PSI motorsports
LS based air to water intercooled billet 76mm car
Wednesday, August 20, 2014
Marks car goes 8.50 first day out
took marks car to the track today and i honestly expected 8.7x's out of it but still surprised me with a 8.53@160mph in the first few passes. on pump fuel, amazing
Sunday, August 17, 2014
street drive then dyno tuning marks notch
first street driving checking it all out
dyno tuning
Sunday, August 10, 2014
racing the ventura and the notch! both easily going mid 10s with traction issues
big dons notch
ventura 11s coasting from half track
ventura easy 10s pass even spinning and lifting
Sunday, November 10, 2013
58x notch running good
finally have the 58x gen4 motor the LY6 running good now with a beta test box from EFI source, for whatever reason our setup was super sensitive with firing spark C and D not sure if others have had this problem, but changing the resistence in the CD output pullup resistors has helped so far, good enough to make some baseline pulls on franks dyno and we netted over 600hp on 14psi, and 640whp with a clean pull
Friday, October 18, 2013
racing dynos, OG ryan with some video commentary
fairmont dyno
cruising down the road
big dons notch and rockstar comments by ryan hahah
Saturday, November 3, 2012
put dons junkyard notch in the 9s today!
put dons notch into the 9s today! well deserved victory!
Labels:
5.3,
dons notch,
drag racing,
maple grove,
notch,
th400,
video
Friday, April 13, 2012
methanol installed, and boost controller for the 4.8 notch
installed a methanol kit today and the ebay boost controller with great sucess, the boost controller definately brought down the spool time by being a ball and spring and blocking reference for a few psi, and the meth kit held the car together when we learned we were out of fuel pump at 20+lbs of boost... LOL
it has a walboro 340lph stealth in the tank and well i can guarantee we are over 600rwhp because its smoking these 28x10.5 slicks from a 70 roll like they are shit.
15* 21lbs of boost, woot woot.
adding the 044 from the ventura tomorrow to see if we can remedy that then buying another 044 for the ventura... hopefully racing this 4.8 beast sunday.
Subscribe to:
Posts (Atom)